Coupled analysis for response and instability of sloping seabed under wave action

Wave-induced instability of seabed may cause damage to coastal and offshore structures. This issue has been investigated mostly for mildly sloping ($<5^{°}$) seabed considering uncoupled or one-way coupled response of wave and seabed interaction. However, some of the marine structures are founded on seabed with steeper slopes. In this study, the wave-induced response and instability of sloping seabed are evaluated using a coupled finite element model. The interaction between fluid and porous seabed accounting for the effect of fluid motion on the seabed response, and conversely the effect of seabed response on the fluid motion (but not on the surface wave profile) is considered. The results indicate that the system response (fluid pressure, stresses, etc.) and the extent of instantaneously liquefied zone within the sloping seabed with significant steepness are lesser than those for horizontal seabed. Moreover, for typical sediment and wave characteristics, for the flat seabed, the response obtained from fully coupled analysis is not significantly different from those obtained by uncoupled analysis. For the sloping bed, such difference is slightly greater as compared to that for the flat bed.     

基于倾斜摄影测量的大比例尺三维测图技术

目前,城市大比例尺地形图更新主要采用全野外的测量方法,不仅耗费大量的劳动力,并且效率低下。旋翼机和倾斜摄影测量技术的快速发展,为城市大比例尺地形图的测绘与更新提供了全新的技术手段。本文以滕州市城区约10 km2的1∶500地形图测绘项目为例,采用大疆精灵4 Pro旋翼机进行数据获取,Smart 3D软件进行空三加密及三维建模,最后在EPS软件中进行三维测图,并对地形图成果进行了精度检核,验证了技术方案的可行性,为同类项目提供了有益参考。     

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.     

全二维气相色谱-电子捕获检测器测定复杂基质土壤中24种有机氯和拟除虫菊酯类农药

目前针对环境样品中有机氯和拟除虫菊酯类农药的检测方法主要有气相色谱法和气相色谱-质谱法（GC-MS），由于气相色谱法采用电子捕获检测器从而具有较高的灵敏度，在污染物的环境行为研究中得到广泛应用，GC-MS法的定性效果好，但检测灵敏度相对偏低。本文研究了2018年土壤详查江苏地区样品中有机氯农药和拟除虫菊酯的残留状况，结果显示，即使经过多次净化仍有20%的样品存在假阳性或基质干扰现象。为了提高定性准确度，同时保证检测灵敏度，实验建立了复杂基质土壤中20种有机氯农药和4种拟除虫菊酯的全二维气相色谱-电子捕获检测器检测方法，最终选择中等极性的TG-35MS为第一色谱柱，非极性的（DB-1）为第二色谱柱，将鲜样与无水硫酸钠混合均匀后，以正己烷-丙酮（1：1，V/V）为提取剂进行索氏提取，采用全二维气相色谱-电子捕获检测器进行检测，外标法定量。各物质的质量浓度均在1.0~500μg/L内与其峰面积呈线性关系，相关系数均大于0.995，检出限为0.02~0.17μg/kg。用标准加入法进行回收实验，测得回收率为80.7%~103.5%，测定值的相对标准偏差（n=6）为1.84%~10.12%。本方法将高灵敏度检测器与全二维色谱相结合，在保证检测灵敏度的同时增加了峰容量，有效去除了基质干扰。相比2018年土壤详查参考方法HJ 835—2017的检出限0.02~0.09mg/kg（全扫模式），本方法检出限显著降低，且操作简单，可为复杂基质样品中的痕量超痕量检测提供参考。     

三维实景地图生产与应用

实景地图近年来发展迅速,在日常生活中应用广泛,如旅游景点、宾馆、银行、政府服务中心等的空间位置查询、服务内容介绍等。实景地图的生产方法、生产流程有多种多样,产品质量参差不齐。目前,利用轻型无人机航空摄影系统实现三维全景地图生产,生产方式方便、高效且质量较好。该文介绍了生产三维实景地图的无人机系统及三维实景地图生产方法与过程,通过采用无人机系统实景地图的生产实例,讲述了实景地图应用现状、发展前景及存在的问题。     

一种横观各向同性岩体蠕变模型

层状岩体由于层理面或者结构面的存在，在力学上具有横观各向同性的特点，现有的各向同性蠕变模型难以全面反映横观各向同性岩体的蠕变力学特性。为构建能够反映横观各向同性岩体的三维蠕变模型，以能反映瞬时应变、减速蠕变和稳态蠕变特征的黏弹性Burgers模型为基础，基于常泊松比假定，在三维各向同性蠕变本构方程的基础上，按照算子替换的方法，将横观各向同性柔度矩阵代替各向同性柔度矩阵，并考虑了平行和垂直层理方向岩体蠕变力学行为的差异性，推导了横观各向同性岩体的三维蠕变本构方程。根据本构方程的特点，提出了根据平行和垂直方向岩体蠕变试验结果进行三维蠕变本构模型中蠕变参数的辨识方法。将提出的模型应用于三轴蠕变试验参数辨识，从而获得了一套完整的三维蠕变参数，并与试验结果进行对比分析，从而验证了所提模型与方法的合理性和有效性。进一步，指出了传统蠕变试验设计方案的局限性，给出了横观各向同性材料蠕变试验设计建议。研究成果为研究岩体三维蠕变机制提供了新思路，可对岩体蠕变试验设计提供相应的科研支撑。     

河南尉氏县西部地质地球物理综合解译及地热资源远景区预测

尉氏县地热资源开发尚处于起步阶段，为适应大规模地热资源开发需求，当前急需探明该区地热资源赋存情况。研究区位于太康隆起次级构造单元中部鼻状构造带及尉氏—薛店次凹带结合部位，本文通过尉氏县城西部所采集的220个大地电磁测深点的二维及三维反演工作，结合二维反射地震剖面，分析了研究区地层、断裂展布构造，并对地热资源远景区进行了预测。维性分析结果表明研究区主构造走向为北西向，二维及三维大地电磁测深反演结果表明研究区4 km以浅地层由上到下可分为四层：新近系—第四系、三叠系、石炭系—二叠系、寒武系—奥陶系；综合二维反射地震及大地电磁测深资料，剖面位置处可识别出三条正断层。选择断裂带周边或穿过断裂带钻井，对水量有一定保证。     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

大功率高频电波加热电离层的非线性物理过程

地基大功率电波加热电离层是通过地基大功率短波发射机向电离层发射无线电波，通过波-粒和波-波的相互作用将无线电波的能量注入电离层.通过这种有目的可操控的方式改变电离层电子密度和温度的分布，可以深入研究电离层中等离子体能量和物质的非线性演化过程，特别是电离层电子的非平衡态分布和加速问题.本文通过对电离层加热中几个比较重要物理过程的评述，对过去20年来我国研究学者在这一研究方向上取得的重要进展进行了介绍.     

A one‐dimensional process‐based approach to study reservoir sediment dynamics during management operations

A comprehensive understanding of the dynamics of erosion and sedimentation in reservoirs under different management conditions is required to anticipate sedimentation issues and implement effective sediment management strategies. This paper describes a unique approach combining fluvial geomorphology tools and morphodynamic modeling for analyzing the sediment dynamics of an elongated hydropower reservoir subjected to management operations: the Génissiat Reservoir on the Rhône River. Functional sub‐reaches representative of the reservoir morphodynamics were delineated by adapting natural river segmentation methods to elongated reservoirs. The segmentation revealed the link between the spatial and temporal reservoir changes and the variability of longitudinal flow conditions during reservoir management operations. An innovative modeling strategy, incorporating the reservoir segmentation into two sediment transport codes, was implemented to simulate the dynamics of erosion and sedimentation at the reach scale during historic events. One code used a bedload approach, based on the Exner equation with a transport capacity formula, and the other used a suspended load approach based on the advection–dispersion equation. This strategy provided a fair quantification of the dynamics of erosion and sedimentation at the reach scale during different management operations. This study showed that the reservoir morphodynamics is controlled by bedload transport in upper reaches, graded suspended load transport of sand in middle reaches and suspended load transport of fine sediments in lower reaches. Eventually, it allowed a better understanding of the impact of dam management on sediment dynamics. Copyright © 2017 John Wiley & Sons, Ltd.